Specify Dhcp Server Settings - TP-Link Archer C5400 User Manual

Chapter 12

12. 3. Specify DHCP Server Settings

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary, and
you can reserve LAN IP address for specified client device.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
¾ To specify the IP address that the router assigns:
1. Make sure that the
2. Enter the starting and ending IP address in the
3. Enter other parameters if the ISP offers, the
and is the same as the LAN IP address of the router.
4. Click Save to make the settings effective.
¾ To reserve an IP address for a specified client device:
1. Click the Add button in
Network > DHCP Server.
Enable DHCP Server
Address Reservation
Customize Your Network Settings
checkbox is selected.
IP Address Pool.
Default Gateway
section.
is automatically filled
75