System Log - TP-Link Archer C5400 User Manual

Chapter 13
• Forbid all devices to manage the router remotely: Select
Management and click Save.
• Allow all devices to manage the router remotely:
1 ) Select Enable Remote Management for All
2 ) Enter Web Management Port
3 ) Click Save.
Devices on the Internet can log in to
http://113.116.60.229:1024) to manage the router.
Tips:
1. You can find the WAN IP address of the router on
2. The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
• Allow specific devices to manage the router remotely:
1 ) Select Enable Remote Management for Specified
2 ) Enter Web Management Port
3 ) In Remote Management IP
to manage the router.
4 ) Click Save.
Devices using this WAN IP can manage the router by logging in to
IP:port number (such as http://113.116.60.229:1024).
Tips:
The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.

13. 9. System Log

When the router does not work properly, you can save the system log and send it to the
technical support for troubleshooting.
¾ To Save the System Log in Local:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
3. Choose the type and level of the system logs according to your need.
4. Click Save Log to save the system logs to local.
(1024-65535 or 80).
http://Router's WAN IP address:port number
Basic
(1024-65535 or 80).
address, enter the IP address of the remote device
System Tools > System
Devices.
> Network Maps > Internet.
Set Up a Dynamic DNS Service Account
Devices.
Set Up a Dynamic DNS Service Account
Log.
Manage the Router
Disable Remote
(such as
if you want to log
http://Router's WAN
if you want to log
93