Customize Your Settings - TP-Link Archer C5400 User Manual

Chapter 6
1 ) Open the
2 ) Type the server address in the address bar:
Computer
3 ) Press [Enter] on the keyboard.
4 ) Access with the username and password you set in
Tips:
You can also access the USB disk via a third-party app for network files management,
which can resume broken file transfers.
Use a third-party app for network files management.
Pad
Tips:
Refer to Set Up a Dynamic DNS Service Account
6. 2. 2.

Customize Your Settings

¾ To Only Share Specific Content
By default, Share All
only share specific folders, follow the steps below:
1. Visit http://tplinkwifi.net, then log in with the username and password you set for the
router.
2. Go to Basic > USB Settings
Click the button to disable
3. Select the Volume Name
4. Tick Enable Authentication. If you allow network clients to modify this folder, Tick
Enable Write Access.
Windows Explorer
Windows users) or open a web browser.
Type in ftp://<WAN IP address of the router>:<port number>
(such as ftp://59.40.2.243:21). If you have specified the domain
name of the router, you can also type in
name>:<port number>
The Address Bar of the Windows Explorer (Windows 7)
Authentication for Data
to learn how to set up a domain name for you router.
is enabled so all content on the USB disk is shared. If you want to
> Sharing Access. Focus on the section of
Share All, then click
and Folder Path, then specify the
(or go to Computer, only for
(such as ftp://MyDomainName:21)
Security.
Add to add a new sharing folder.
Folder Name
USB Application
ftp://<domain
Step 2 Enable
Folder Sharing.
as you like.
35