Download Print this page

La Crosse Technology T83653v2 Instruction Manual page 7

Wireless color forecast station mold risk for forecast station & indoor remote sensor location
Hide thumbs Also See for T83653v2:

Advertisement

The forecast station will accommodate up to three remote outdoor
sensors (TX141TH-BCH or TX141TH-ACH not included).
+
Press the
button to easily see the temperature in various locations:
outdoors, baby's room, greenhouse, basement, etc. Monitor remote
temperature in up to 3 locations within a 300 ft. wireless range of the
forecast station.
To connect multiple remote sensors to the forecast station:
1. Remove the battery cover from all the sensors (Leave battery covers
off until all sensors are received by the forecast station).
2. Set the first remote sensor to Channel 1 and insert 2
AA batteries.
3. Set the second remote sensor to Channel 2 and insert 2 AA
batteries.
4. Set the third remote sensor to Channel 3 and insert 2 AA batteries.
5. Press and hold the INFO button on the forecast station for 5
seconds. The forecast station will search for all remote sensors.
6. Press the TX button on each remote sensor to transmit RF signal.
7. When RF connection is established, the temperature & humidity for
each of the selected channels will appear on the main unit.
8. Allow the sensors and the forecast station to stay 5-10 feet apart for
15 minutes to establish a solid connection.
9. Install the battery covers on each sensor.
10. After 15 minutes place the remote sensors in appropriate locations.
Press and release the
station when multiple sensors are used.
Note: If only one sensor is connected the other channels will show
dashes for temperature and humidity.
Low battery icon indicates low battery for station or sensor.
If the icon is displayed in Remote Temperature section,
replace batteries in the remote sensor.
If the icon is displayed in Indoor Temperature section,
replace batteries in the forecast station.
Outdoor use: Mount the remote sensor on a north-facing wall or in any
well shaded area. Under an eave or deck rail is preferred.
Model: T83653v2
Setup with Multiple Remote Sensors
+
button to view channels 1, 2 or 3 on the forecast
Low Battery Icon
Remote Sensor Use and Positioning
www.lacrossetechnology.com/support
Low Battery
Icon
Page | 7

Advertisement

loading