Displaying Navtex Messages - Furuno FAX-30 Operator's Manual

4. NAVTEX OPERATION: NAVNET
4.4

Displaying Navtex Messages

4.4.1 Displaying navtex messages
1. At the standby display, press the NAVTEX soft key.
2. Rotate the [ENTER] knob to choose the message to display.
3. Press the SELECT MSG soft key or push the [ENTER] knob.
4. Press the RETURN soft key several times to return to the standby display.
4-6
Station ID, Category, No.
Date received
1. IA55 JUN/06 03:57 518kHz SAR*
2. IA53 JUN/06 03:58 518kHz NEW#
3. IA52 JUN/06 03:59 518kHz NEW
4. IA48 JUN/06 04:01 518kHz NEW
* = "SAR" denotes SAR message.
# = NEW means unread message, and it disappears when
the power is turned off.
Navtex message selection screen
Station ID (I), Category (A), Message No. (55)
Date received
1A55 JUN/05 03:57 518kHz ERROR RATE=0.0%
ZCZC IA55
160520 UTC JUNE 05
JAPAN NAVTEX N.W. NR 0775/2002
ASHIKURI MISAKI, SOUTHWARD.
Message
FLARE DROPPING. 150930Z TO 151100Z JUNE,
ALTERNATE 160930Z TO 161100Z JUNE.
WITHIN 10 MILES OF 31-00N 133-00E.
GEODETIC DATUM UNKNOWN.
NNNN
Sample navtex message
Time received
Frequency
NAVTEX
SELECT
MSG
RCV
NAVTEX
RX
SETUP
RETURN
Time received
Frequency
Error Rate
SELECT
MSG
RETURN