Receive Mode; Logout - Furuno FAX-30 Operator's Manual

1. OVERVIEW, SETUP
1.3.3

Receive mode

The FAX-30 has three receiving modes: WX FAX, NAVTEX, and FAX&NAVTEX.
1. Click RX MODE on the FAX-30 display.
2. Click desired receive mode and then click OK.
3. Click "back" to finish.
1.3.4

Logout

The FAX-30 cannot be accessed from more than one NavNet 3D unit at a time.
Therefore, logout from a unit you are not using to enable access from other
units.
1. Click Top on the FAX-30.
2. Click LOGOUT.
1-12
RX MODE
< back
WX FAX
NAVTEX
FAX(TIMER) & NAVTEX
OK