Canon iR1024A Quick Start Manual page 23

(iR1024i/iR1024iF Only)
1
Connect a Category 5 or greater twisted pair LAN cable to the 10Base-T/100Base-TX port on
the back of the machine. Connect the other end of the cable to a network router or a hub.
100Base-TX Connector
NOTE
If you use the machine as a local printer, connect the machine directly to a computer using a USB cable.
(See "Installing/Uninstalling Software (iR1024A/iR1024F/iR1024i/iR1024iF/iR1020 Only)," on p. 25.)
Specify the IP Address Manually
1
Press [Additional
Functions].
PC with PC with
10Base-T Connector
Ethernet Cable
Hub
2
Press [
select <9. SYSTEM
SETTINGS>, then press
[OK].
3
] or [ ] to Press [
select <5. NETWORK
SETTINGS>, then press
[OK].
] or [ ] to
22