Lexus LS460 Owners Book page 55

■
Setting and canceling the functions (without navigation system)
To switch between setting and canceling, follow the procedure below.
Close all the doors and switch the "ENGINE START STOP"
STEP 1
switch to IGNITION ON mode. (Perform the step 2 within 20
seconds.)
STEP 2
Function
Shift position linked door locking
function
Shift position linked door unlock-
ing function
Speed linked door locking function
Driver's door linked door unlocking
function
When the setting or canceling operation is complete, all doors are locked
and then unlocked.
1-2. Opening, closing and locking the doors and trunk
Shift the shift lever to "P" or "N",
press and hold the driver's door
lock switch (
about 5 seconds then release.
The shift lever and switch positions
corresponding to the desired func-
tion to be set are shown as follows.
Use the same procedure to cancel
the function.
Shift lever position
P
N
or ) for
Driver' s door lock
switch position
1
55