2-4. Using other driving systems
NOTICE
Camera sensor (with driver monitor system)
■
Observe the following to ensure that the PCS functions correctly:
Do not subject the camera sensor to strong impact or force, and do not disas-
●
semble the camera sensor.
Do not scratch the camera lens, or let it get dirty.
●
Headlights (with driver monitor system)
■
Observe the following to ensure proper near-infrared ray projection:
Keep the headlights clean at all times.
●
The detection performance may deteriorate if the high beams are misaligned or
●
the high beam is inoperative.
Precautions for cleaning the driver monitor sensor (with driver monitor system)
■
Gently wipe the sensor with a soft cloth to prevent damage.
●
Wipe any excess dirt with a cloth dampened with neutral detergent, all liquids
●
having been wringed out of the cloth. After that, wipe again with a dry cloth.
Do not use benzene, thinner, glass cleaners, wax, etc.
●
304