Timing Requirement - Philips 192E2SB2/10 Service Manual

62 192E2SB2 LCD
3.3

Timing requirement

Factory Preset mode definition:
1. Perfect FOS while presenting those timings.
2. Will specify those timing in User's Manual
Preset mode definition:
1. Need to support those timings.
2. Perfect FOS after auto adjustment.
User mode
1. Can save those timing that not in Preset mode and can be showed (not over scaler or
Panel spec.)
2. It needs to reserve the 10 timings space in memory size.
3.3.1 Mode storing capacity
Preset modes
3.3.3 Software control functions via OSD / control adjustable functions:
Please refer to following M1 OSD definitions, if any deviation, then refer to PVT Exit sample.
ITEM
1 OSD DEFINITIONS
2 OSD LANGUAGES
3 OSD TREE
4 POWER ON LOGO
5 Audio Selection
2010/08/19
General Product Specification
: 43
Stand-alone – On:
Isolate video and audio control
input
Stand-alone – Off:
Integrate video and audio control
input
Mute – On: Turn off audio
Mute – Off: Turn on audio
192E2SB2
PHILIPS
Reset -
No: Exit
Yes: Auto adjustment for
displaying timing mode and
recall factory preset
8 LANGUAGES
Power On Logo: Power On
Show up Philips logo 3
seconds
Change to input signal.
This picture is reference only.
The official drawing will send
out by PM.
18.5" Wide WXGA LCD Monitor
10 of 26