Settings Module - Oce arizona 1240 GT User Manual

Settings Module

Settings Module
Introduction
The Settings Module allows you to review and change the date and time, network connection
settings, user interface configurations, printer settings and, if installed, the Roll Media settings.
Date and Time Settings
• Date - display only, cannot change the date
• Time - change the time of day, if required
• Whether Daylight Savings Time is set
• Time Zone - select the time zone for the printer location
Network Connection Settings
NOTE
Typically, DHCP is used to automatically obtain network settings. If "Use DHCP" is selected, the
only thing you might want to change is the network name of the printer. The settings are
displayed to troubleshoot possible network connection problems. One situation that would
require changes is if your network does not use DHCP to automatically obtain network settings.
In this case network settings have to be entered manually. If you don't know how to do this,
bring in a network consultant to determine what the setting must be for the network (alternately,
you can purchase a DHCP router for your network that will automatically supply the network
settings).
• Network Name
• Printer Description
• Network Adapter Name
• MAC Address
• Network Status
• Use DHCP
• IP Address
• Subnet Mask
• Default Gateway
50 Chapter 4 - How to Navigate the User Interface
Océ Arizona 1200 Series