How To Remove Stains (Coffee, Tea, Soda Pop, Etc.) - Oce arizona 1240 GT User Manual

How to Remove Stains (coffee, tea, soda pop, etc.)

How to Remove Stains (coffee, tea, soda pop, etc.)
Supplies Needed: Rubber gloves, soap, hot water, and lint-free cloth.
Procedure
1. Put on nitrile gloves
2. Mix a cleaning solution that is 50:1 hot water to soap.
NOTE
Use a mild detergent such as Ivory - avoid soaps that have dies, moisturizing oils, or
perfumes as they may damage the capstan. Read the label! Our R&D Lab has tested
only Ivory Detergent. If you are uncertain about a detergent try it out in a 50:1 solution
on a small area at the end of the capstan.
3. Wet the cloth in the cleaning solution and wring out excess liquid. Scrub the surface of the
capstan using the cleaning cloth.
4. Allow adequate time for the capstan to dry.
NOTE
If scrubbing action leaves debris on the surface, wait for the surface to dry completely,
then follow the procedure listed above for "Removing Solid Debris".
202 Chapter 12 - Printer Maintenance
Océ Arizona 1200 Series