Table of Contents
Advertisement
Displaying data stored in the built-in memory
When an SD Memory Card is inserted in the camera, images and
movies on the SD Memory Card are displayed. If you want to display
images and movies in the built-in memory, turn the camera off and
remove the SD Memory Card, or follow the procedure below to use the
"Built-in memory display" function.
Make sure that the camera is turned off before inserting or removing
the SD Memory Card.
Viewing images in the built-in memory while the SD Memory Card is
inserted (built-in memory display)
• When you press and hold down the Q button for more than 1.2 seconds
in A mode or while a menu is being displayed, the lens retracted. After the
message [Display image from built-in memory] appears, images and
movies stored in the built-in memory are displayed.
• In the built-in memory display, you can play back still pictures (including
enlarged display) (p.106, p.116) and movies (p.107), and switch between four-
image display, nine-image display, folder display, and calendar display (p.108).
• In the built-in memory display, you cannot delete data, delete a selection,
display the Playback Mode Palette, or display the menu. If you want to
perform any of these operations on images or movies in the built-in
memory, do so after removing the SD Memory Card.
2
51
Advertisement
Table of Contents
