Pentax Optio E70 Operating Manual page 201

Pentax digital camera operating manual
Hide thumbs Also See for Optio E70:
Table of Contents

Advertisement

Message
Data being recorded
Data being processed
Built-in memory full
No image to be
processed
This image cannot be
processed
No card in the camera
The built-in memory is
not enough to copy
images
Cannot process
correctly
Display image from built-
in memory
The camera will turn off
to prevent damage from
overheating
Messages such as the following may appear on the display when using
the PictBridge function.
Message
Low paper level in the
printer
No paper in the printer
Paper stuck in the printer
Low ink level in the printer
No ink in the printer
Printer error
Data error
Connection error
Check printer
Printing now
This message appears when you try to switch to Q mode
while an image is still being recorded, or when the protect
setting or DPOF setting is being changed. It disappears
after the image is recorded or the setting is changed.
This message appears when the camera takes more than
five seconds to display an image due to image processing,
or when the SD Memory Card or the built-in memory is
being formatted.
Displayed if the built-in memory is full when saving a file.
Displayed when there are no images.
Displayed for files that cannot be processed.
Displayed when no SD Memory Card is inserted.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Compensation processing fails.
Displayed when the camera enters the built-in memory
display.
Displayed when the temperature within the camera is too
high and the camera turns off automatically. Wait for awhile
and then turn the camera on again after the temperature
within the camera cools down.
The paper level of the printer is low.
There is no paper in the printer.
The paper is stuck in the printer.
The ink level of the printer is low.
There is no ink in the printer.
An error message has been sent from the printer.
A data error message has been sent from the printer.
Displayed when a PictBridge connection fails.
Displayed when printing is being executed.
Description
Description
8
199

Advertisement

Table of Contents
loading

This manual is also suitable for:

17472 - optio e70 digital camera

Table of Contents