Clock Settings - Kenwood DDX4017DAB Instruction Manual

INITIAL SETTINGS INITIAL SETTINGS
• To clear the registered security code, perform
steps 1 and 2.
On step 3, press [CLR] to display <Security Code>
screen. Then, enter the current security code to
clear and press [Enter].
• When the unit has been reset or disconnected
from the battery, you are required to enter the
security code. Enter the correct security code, then
press [Enter].
❏ Activating the security function
You can activate the security function to protect
your receiver system against theft.
1
Display the <System> setting screen.
On the Home screen:
• You can change the page to display more
items by pressing [ ]/[
2
The security function is activated.
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.

Clock settings

1
Display the Home screen.
On the monitor panel:
2
Display the <Clock> screen.
].
• You can also display the <Clock> setting
screen by touching the clock area on the
Home screen.
3
Set the clock time.
1
<NAV>* Synchronizes the clock time with
the connected navigation unit.
<Radio Data Synchronizes the clock time with
System>* 2 FM Radio Data System.
3
<DAB>* Synchronizes the clock time with
the digital radio (DAB).
<OFF> Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to "00".
4
Finish the procedure.
1
* Only for DDX4017DAB/DDX4017BT: Appears only when a navigation
unit is connected.
2
* Only for DDX4017BT/DDX4017BTR/DDX317BT.
* 3
Only for DDX4017DAB.
ENGLISH 5