Kenwood DDX4017DAB Instruction Manual page 29

RADIO RADIO
❏ Activating/deactivating TI/News
Standby Reception
TI Standby Reception
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
• If the TI indicator is lit in orange, tune into another
station providing Radio Data System signals.
To deactivate TI Standby Reception: Press [TI].
(The TI indicator turns off.)
• The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.
• For DDX4017DAB: The TI Standby Reception can
also be activated or deactivated from "DAB"
source control screen. (Page 32)
News Standby Reception
1
Display the <Radio Mode> screen.
(Page 27)
2
<00min> – Activate News Standby Reception
<90min> (the NEWS indicator lights up).
Select the period of time to
disable interruption.
<OFF> Deactivate the function.
• The volume adjustment while receiving News
is automatically memorized. The next time the
unit switches to News, the volume is set to the
previous level.
❏ Tracing the same program—Network-
Tracking Reception
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in to
another FM Radio Data System station of the same
network, possibly broadcasting the same program
with stronger signals.
• When shipped from the factory, Network-Tracking
Reception is activated.
To change the Network-Tracking Reception
setting
1
Display the <Radio Mode> screen.
(Page 27)
2
[AF] Switch to another station. The
program may differ from the one
currently received (the AF indicator
lights up).
[AF Reg] Switch to another station
broadcasting the same program (the
AF indicator lights up).
[OFF] Deactivate the function.
• The RDS indicator lights up when the
Network-Tracking Reception is activated and
an FM Radio Data System station is found.
❏ Automatic TI station seek—Auto TP
Seek
When traffic information station reception is poor,
the unit automatically searches for another station
that can be received better.
To activate Auto TP Seek
1
Display the <Radio Mode> screen.
(Page 27)
2
To deactivate Auto TP Seek: Press [OFF].
ENGLISH 29