Trouble Shooting - Pentax MZ-6 Operating Manual

MZ-6(E)06 F2/119-133 11/8/02 12:13 PM
124
Page 124

TROUBLE SHOOTING

Before requesting service, please check the following points.
N Nothing is displayed on the LCD panel.
Check 1: Power is OFF.
Countermeasure
Turn the main switch to ON (
Check 2: Batteries are not inserted or inserted backwards.
Countermeasure
Check the insertion direction of the batteries and insert
the batteries correctly (
Check 3: The batteries are exhausted.
Countermeasure
Replace the batteries with new ones (
N Shutter does not trip.
Check 1: Power is OFF.
Countermeasure
Turn the main switch to ON (
Check 2: Batteries are not inserted or are inserted backwards.
Countermeasure
Check the insertion direction of the batteries and insert the
batteries correctly (
Check 3: The "Battery Warning" is blinking.
Countermeasure
Replace the batteries with new ones (
Check 4: The mode dial is set to the [PF] [
tion.
Countermeasure
Set the mode dial to a position other than the [
tion, [PF] position or [ISO] position.
Check 5: The built-in flash is charging.
Countermeasure Wait until charging is finished (
N Subject is out of focus.
Check 1: The subject to be focused on is not inside the AF
frame.
Countermeasure
Cover the subject you wish to photograph within the AF
frame before shooting (
Check 2: The picture-taking distance is too close.
TROUBLE SHOOTING
22).
13).
13, 38).
22).
13).
13, 38).
] or [ ISO ] posi-
] posi-
31).
27).
125