Step 3 Attaching A Lens; Step 3 Attaching A Lens - Pentax MZ-6 Operating Manual

MZ-6(E)02 B/011-020 11/8/02 11:55 AM
Step 3 Attaching a Lens
1
Remove the body mount cap and rear lens cap.
Memo Memo
The body mount cap protects the inside of the camera from dust and
scratches upon factory shipment. For long-term camera storage, the
optional accessory "Body Mount Cap K" is also available.
2
Align the red dots on the lens and camera while attaching
the lens to the camera, then turn the lens clockwise until
it clicks in place.
Memo Memo
• After attaching the lens, try and turn the lens counterclockwise to make
sure it is locked in place.
14
Page 14
3
As shown in the illustration, remove the front lens cap.
Memo Memo Handling the Lens
• To detach the lens, hold down the lens unlock button and turn the lens
counterclockwise.
• We assume no responsibility nor liability for damages resulting from the
use of lenses made by other manufacturers.
• Use a soft, dry cloth to keep the electrical contacts on the body mount
and lens mount clean. Dirt or corrosion on the contacts can cause
problems with the electrical system.
BEFORE TAKING PICTURES
15