Table of Contents
Advertisement
156
Using Slow-Speed-Sync
You can use slow-speed-sync when shooting portraits with the sunset in the
background. Both the portrait and the background are captured beautifully.
• Slow-speed-sync slows the shutter speed. Use the Shake Reduction function
or turn off the Shake Reduction function and use a tripod to avoid camera
shake. The picture will also blur if the subject moves.
• Slow-speed-sync shooting can also be performed with an external flash.
Using b (Shutter Priority) Mode
1 Set the mode dial to b.
b (Shutter Priority) mode is set.
2 Use the e-dial to set the desired shutter speed.
The background is not properly corrected if aperture value is blinking
when shutter speed is set. Set the shutter speed so that aperture value
does not blink.
3 Press the K button.
The flash pops up.
5
4 Take the picture.
Using a (Manual) Mode
1 Set the mode dial to a.
a (Manual) mode is set.
2 Set the shutter speed (under 1/180 sec.) and aperture value to obtain
correct exposure.
3 Press the K button.
The flash pops up.
In a (Manual) mode, you can raise the flash at any time prior to shooting.
4 Take the picture.
Distance and Aperture when Using the Built-in Flash
A set criteria is necessary between the guide number, aperture and
distance when shooting with the flash.
Calculate and adjust the shooting conditions if flash is not sufficient.
Built-in flash guide number
Sensitivity
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
Built-in flash guide number
15.6
22
31
44
62
Advertisement
Table of Contents
