Setting The 7-Day Program Switch-On Time - Theben SEL 173 DCF Operating Instructions Manual

8.2 Setting the 7-day program switch-on time

On channel 1 the astronomical switching has programmed a switch-on time for
each morning. If channel 2 has been activated as an astronomical channel, a
switch-on time will also have been programmed for each morning on channel 2.
Example: Programming the switch-on time for night interruption.
– Channel C1 should switch on from Mon to Fri at 5.30 h o
Channel 1
Switch on
Week days Confirm days
Minutes
Hours
Save
Other programming as described or by pressing key v return to the automatic
program.
8.3 Programming the date program
Example: Channel C1 should switch on at 7.30 h on 1.5.
Position the cursor ▲.
Select prog Channel 1
On Date
Date day Date month
Hours
Minutes
Save
Further programming as described or by pressing key v return to the
automatic program.
73