X-Sync Terminal - Pentax 67II Operating Manual

ADVANCED OPERATION
Overview of Flash Function
CAMERA FUNCTION
After the flash is charged, the camera automatically
switches to the flash-sync speed (1/30 of a second).
Flash confirmation signal in the viewfinder and LCD panel
TTL auto flash
Slow-speed sync in the Metered Manual Mode
Trailing-shutter-curtain sync flash*
Contrast-control flash mode*
TYPE A : AF540FGZ, AF500FTZ*
TYPE B : AF400FTZ, AF240FT
TYPE C : AF400T, AF280T, AF220T, AF200T, AF201SA,
AF200SA
TYPE D : AF200S, AF160, AF140
Using other types of flash
● Use of non-Pentax flash units may damage the camera. For the best results, use a Pentax dedicated flash unit.
● Some large studio type flashes may have inverted contacts, and will therefore not fire when attached to a 672 camera.
For further information, contact the flash unit manufacturer. To prevent the view from being vignetted by the second shutter
curtain, it is recommended that you use a shutter speed one step slower than the flash sync speed.
● The secondary functions do not work when the cord is connected to the X-sync terminal only.
62
2
2
3
, AF330FTZ, AF360FGZ
TYPE A TYPE B
N N
N N
N N
N N
N N
N
*1 : The AF200SA and AF201SA do not operate.
*2 : The shutter speed is 1/15 or slower.
*3 : Multi-burst and slave-sync flash are possible.
TYPE C TYPE D
N N
N
1
*
N N