Pentax 67II Operating Manual page 81

Mirror
Film winding
Exposure meter
Exposure compensation
Multiple exposure
Exposure memory lock
Flash sync
Power source
Battery
exhaustion warning
Dimensions and weight
Supplied accessories
Instant-return mirror with lock-up device
With rapid wind lever (7 pre advance angle and 190 advance angle)
TTL multi (6)-segment wide-open metering, Metering range from EV2 to EV21 at
ISO100 with 105 mm f/2.4 lens in multi (6)-segment metering, Center-Weighted
Metering Mode and Spot Metering Mode can be set
±3EV in 0.3EV step increments (With an optional AE Pentaprism 672 attached)
Via multi-exposure lever
With the memory lock button depressed, the memory timer locks the exposure
value for 20 seconds. The memory lock function remains while the shutter
release button is depressed halfway down. (With an optional AE Pentaprism
672 attached)
Via 5P X-sync terminal for Pentax dedicated auto flashes, X-sync socket is
provided for Pentax non-dedicated flashes, Flash Sync Speed: 1/30 sec, ISO
range: 25-800
Two 3V lithium batteries (CR123A or the equivalent)
Low battery warning H is lit (blinking when the shutter is locked; no indication in
the viewfinder).
185.5 mm (W) ✕ 108.5 mm (H) ✕ 92 mm (D) (7.3" ✕ 4.3" ✕ 3.6"), 1210 g (42.7
oz), body only, without batteries and lenses
185.5 mm (W) ✕ 151 mm (H) ✕ 106 mm (D) (7.3" ✕ 5.9 ✕ 4.2"), 1660 g (58.6 oz),
body with AE Pentaprism Finder 672 attached without batteries and lenses
Body mount cap 67, Finder cap 67, LX sync terminal cap, 5P sync terminal cap, Strap G
OTHERS
79