A35（Dust Collection Sheet; 6． 【Confirmation】Ccd Base Plate Support Pillar C000; 7．0-A301; 8． 【Confirmation】Check The Terminal Of Sdm - Pentax K100D SUPER Service Manual

5．A35（Dust collection sheet）
① Attach A35 x 2, refer to the picture
6．[CONF] CCD Base Plate Support Pillar
[Required equipment] Block gauge for 35mm, Dial gauge comparator, etc.
① Measure height of the CCD base support pillar (3 places) from the mount
surface as shown in the figure.
Standard
Use block gauge for 35mm,
（45.46mm）
7．Arrange the lead wires
① Fix the flex with A39 (BT 6x10)
② Arrange the lead wires as picture
8． 【Confirmation】Terminal for SDM
＊Attach SDM lens and check the function of SDM
49.610±0.02 mm
＋4.15
±0.02 mm
（+4.13～4.17 mm）
76706 -5/6-
+4.15
+4.
+0.15
①
A39