Using the Battery
Insert the battery into the camera. Use only a D-LI50 battery.
Charging the Battery
Battery D-LI50
Indicator lamp
When using the battery for the first time, or when the battery has not been
used in a long time, or when [Battery depleted] appears, recharge the
battery.
Note: AC plug cord "Listed, Type SPT-2 or NISPT-2, 18/2 flexible
cord, rated 125 V, 7A, minimum 6ft (1.8m)"
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Face the
into the battery charger.
The indicator lamp is lit red during charging.
The indicator lamp turns off when the battery is fully charged.
4
When the battery is fully charged, remove the battery from
the battery charger.
Battery charger D-BC50
mark on the exclusive battery up and insert it
AC plug cord
35
2