Specifying The Parameters - Pentax K20D User Manual

200

Specifying the Parameters

Specifies the parameters for editing RAW images. When multiple images
are selected, all images are edited with the same parameters.
If Quality Level is not set to [TIFF], images are saved as JPEG images.
1
Select [Change Setting] in Step 3
of p.197 or Step 5 of p.199 and
press the 4 button.
The parameter setting screen appears.
2
Use the four-way controller (23) to choose the parameter
you want to change.
The following parameters can be changed.
JPEG Recorded
*1
Pixels
Quality Level
8
White Balance
Sensitivity
Custom Image
Color Space
High-ISO Noise
Reduction
*1 If Quality Level is set to [TIFF], this is fixed at X.
*2 White Balance cannot be set for RAW files taken in Multi-exposure mode.
X(4672×3104)/J(3872×2592)/
P(3008×2000)/i(1824×1216)
Z (Premium)/C (Best)/
D (Better)/E (Good)/TIFF
F (Auto), G (Daylight), H (Shade), ^
(Cloudy), JN (Daylight white fluorescent lights),
JW (White light fluorescent lights), JD (Daylight
*2
colors fluorescent lights), I (Tungsten Light), E
(Flash), K (Manual), Color Temperature (three
types)
–2.0~+2.0
Image Tone/Saturation (Filter Effect)/Hue (Toning)/
Contrast/Sharpness
sRGB/AdobeRGB
Noise reduction level (4 levels)
Recorded Pixels Recorded Pixels Recorded Pixels
AdobeRGB AdobeRGB AdobeRGB
MENU
14.6
M
OK OK OK
OK