Acura ILX 2013 Owner's Manual page 31

Interface Settings Colour
Illumination
Priority
control
a button
1
Sunlight sensor 2
(see your
Owner's Manual
for location)
Dash illumination 3
adjustment
buttons (see your
Owner's Manual
for location)
Headlights 4
(Auto/On/Off)
Screen colour N/A
choice
30
Index
Operation
Selects Day, Night, or Off display mode. This button has
the highest priority and overrides all other display control
adjustments listed below.
Remember: Once you press this button, you assume full
manual control of the display mode until the power mode
is set to VEHICLE OFF (LOCK).
If the sunlight sensor detects daylight and the headlights
are turned on, the system automatically overrides the
Night display and displays the Day display mode.
Remember: If desired, use the a button to override
this automatic choice.
When headlights are turned on, and you wish to have the
Day display mode, adjust the illumination to the full
brightness setting (beeps).
Remember: Adjust the dash brightness back to mid-range
to allow auto switching by sensing the headlights are on or
off.
When turned on, the display changes to Night display
mode. The previous three controls listed above can
"cancel" this function.
Remember: Use the a button, or adjust the dash
illumination to full brightness, to set the display to your
desired choice.
The user can select the colour of the screen that will be
displayed for the Day and Night display modes described
above.
Remember: For best contrast, ensure that the map colour
is white for Day and black for Night.
Table of contents