Fiat doblo User Manual page 93

DESTINATION
Select and confirm "DESTINA-
TION" rotating and pressing the knob
22-fig. 1 to start route calculation.
If route guidance is active yet, select-
ing "DESTINATION" AGAIN, THE
DISPLAY SHOWS THE FOLLOW-
ING MESSAGE:
ROUTE TO NEW DESTINATION.
PRESS ENTER TO CONFIRM ESC
TO CANCEL".
92
fig. 111
Pressing "ESC" 23-fig. 1 will maintain
the current route thus refusing new
route calculation that will be inserted
in the "DESTINATION LIST" fig. 111
as second destination. Pressing the
knob 22-fig. 1 will start new route cal-
culation and the old one will become
the second destination.
"CALCULATE
Should there be several destinations,
when reaching the first destination the
display will show the message: "CAL-
CULATE ROUTE TO NEW DESTI-
NATION. PRESS ENTER TO CON-
FIRM ESC TO CANCEL".
Pressing the knob 22-fig. 1 the sys-
tem will calculate the route to the next
destination.
DIRECTORY
This function is used to store an ad-
dress into the navigation system di-
rectory and to associate it to a name
F0D2087g
and a voice sample (e.g.: "Home") for
easy retrieval fig. 112.
The name to be associated with the
destination is entered, after selecting
and confirming "NAME" (in the "DI-
RECTORY" submenu) by rotating the
and pressing the knob 22-fig. 1.
IMPORTANT When selecting
"NAME" remember that it is not pos-
sible to add a name already present in
the Telephone (TEL) function direc-
tory.
To enter the characters simply se-
lect and confirm them by rotating
and pressing the knob 22-fig. 1.
After completing the name, select
"OK".
fig. 112
F0D2088g