Call Charge Factor (Not For U.s.) - Siemens Hicom 150 E User Manual

Call Charge Factor (Not for U.S.)

1.
2.
Call Detail Recording CDR (If Configured and Authorized)
If necessary, you can specify a factor for the dis-
play of call charges as monetary amounts. The call
charge pulses are then multiplied by this factor
(price per call charge pulse).
The call charge factor can be specified separately
for each trunk group (for example, for the external
code 0 or 9).
Prerequisite:
System administration has been started (
Check the display. Select "14 CDR" and confirm
your selection or enter the prompted code.
Check the display. Select "4 Edit Charge Factor"
and confirm your selection or enter the prompted
code.
or
1 4 4
Enter code.
From this point on, simply follow the user prompts
(Select trunk group.
For example: 0, 82 ... 88 for OfficeOne/Point,
For example: 0, 80 ... 84, 850 ... 859 for
OfficeCom/Pro).
Æ
20).
33