Time - Siemens Hicom 150 E User Manual

Time

1.
2.
0 9
The time is stored automatically after an outgoing
external call has been set up, provided that the
ISDN makes this information available.
If this is not the case or if your system is not con-
nected to ISDN trunks, you can enter or modify the
time yourself.
Prerequisite:
System administration has been started (
Check the display. Select " 12 Time" and confirm
your selection or enter the prompted code.
or
1 2
Enter code.
From this point on, simply follow the user
prompts.
Note the data format required for time entry: For-
mat: hhmm (hh = hours as two digits; mm = min-
0 5
utes as two digits).
For example, 0905 for 9.05 h. (= 9.05 a.m.)
or 1430 for 14.30 h. (= 2.30 p.m.).
Time
Æ
20).
29