Multimedia Pocket
Inserting/Removing
A
CAUTION
●
Do not insert/remove the multimedia pocket device in the standby or hibernation
mode, or when the hard disk drive indicator (
●
Do not select [Standby] or [Hibernate] as the setting for [When I close the lid of my
portable computer] in [Control Panel] - [Power Options] - [Advanced].
■
Removing the device
1
Turn the computer over.
2
Press and hold the MP release button (A), then slide the device.
CAUTION
●
Handle the device as shown (holding both sides). Otherwise,
the device may be damaged. Also, do not apply excessive
downward force on the device.
■
Inserting the device
Gently insert the device into the multimedia pocket until it clicks into place.
CAUTION
●
Do not insert the device upside-down.
The bottom of the drive may become disfigured.
Insert the device with the label side facing up.
NOTE
●
You can confirm whether the device is properly recognized or not by selecting the
icon* on the taskbar or [Information] in the Setup Utility. If the device is not recog-
nized (or if a CD/DVD cannot be read or a CD-R/CD-RW cannot be read or written
to), power off the computer and reinsert the device.
Windows
2000:
*
Windows
XP:
) is on.
28