Sony BRC-X1000 Operating Instructions Manual page 20

Installing the camera on a shelf located
at a high spot (example)
1
Loosen the four screws at the bottom of the camera
to remove the four feet.
2
Attach the ceiling bracket (A) to the bottom of the
camera by using supplied four screws (3 M3 × 8).
Align the a mark of the bracket (A) with the front
of the camera as illustrated, with the screw holes of
the bracket aligned with the screw holes of the
camera.
3M3 × 8 (supplied)
a mark
Front of the
camera
Note
Use the supplied screws. Otherwise, you may break
the internal parts of the camera.
3
Attach the wire rope for fall prevention to the ceiling
bracket (A).
Put the wire rope through the fitting for wire rope of
the ceiling bracket (A) and securely attach it to the
bracket using the supplied stainless steel screw (3
M4 × 8).
Caution
Use the supplied screw. Otherwise, the wire rope
may not function properly.
Ceiling
bracket (A)
20
Wire rope (supplied)
3M4 × 8 (supplied)
Fitting for wire rope
Ceiling
bracket (A)