Sony BRC-X1000 Operating Instructions Manual page 17

3
Attach the ceiling bracket (A) to the bottom of the
camera by using supplied four screws (3 M3 × 8).
Align the a mark of the bracket (A) with the front
of the camera as illustrated, with the screw holes of
the bracket aligned to the screw holes of the camera.
3 M3 × 8 (supplied)
a
mark
Front of the
camera
Caution
Use the supplied screws. Otherwise, you may
break the internal parts of the camera.
4
Attach the ceiling bracket (B) to the attachment
materials (not supplied) to mount the camera on the
ceiling.
Be sure to attach it so that the f hole of the ceiling
bracket (B) is placed where the front of the camera
will face.
Attachment materials
Ceiling bracket (B)
5
Attach the wire rope for fall prevention to the
ceiling.
Using an M5 (3/16 inches) socket cap screw (not
supplied), attach it to the attachment materials
different from the one to which the ceiling bracket
(B) is attached.
Ceiling
bracket (A)
M5 (3/16 inch) socket
cap bolt
Ceiling
f
hole
17
Wire rope (supplied)
Attachment
materials
Ceiling
Ceiling bracket (B)