Table of Contents
Advertisement
5. Turn the compressor off by pressing the on/off button.
6. Unplug the hoses, re-install the valve cap on the tire and return the
kit to the stowage area.
What to do after the Tire has been Sealed
After using the temporary mobility kit to seal your tire, you will need to
replace the sealant canister and clear tube (hose). Sealing compound
and spare parts can be obtained and replaced at an authorized Ford
Motor Company dealership or tire dealer. Empty sealant bottles may be
disposed of at home; however, liquid residue from the sealing compound
should be disposed by your local Ford Motor Company dealership or tire
dealer, or in accordance with local waste disposal regulations.
Note: After the sealing compound has been used, the maximum vehicle
speed is 50 mph (80 km/h) and the maximum driving distance is
120 miles (200 km). The sealed tire should be inspected immediately.
Note: After sealant use, the TPMS sensor and valve stem on the wheel
must be replaced by an authorized Ford dealer.
You can check the tire pressure any time within the 120 miles (200 km)
by performing the procedure from Second stage: Checking tire
pressure listed previously.
2013 Taurus
Owners Guide gf, 2nd Printing
USA (fus)
Wheels and Tires
4. Adjust the tire to the
recommended inflation pressure
from the tire label located on the
driver's door or door jamb area.
PSI
Pressing the deflation button near
BAR
the sealant canister removes air
from the tire.
Note: The tire pressure has to be
checked with the compressor in the
off position to get the correct tire
pressure reading.
355
Advertisement
Table of Contents
