Page 1
USER’S MANUAL Model No. EBRTL39515.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal CUSTOMER CARE If you have questions, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. 11 3444-0175 Website: www.polishop.com.br/atendimento www.polishop.com.br CAUTION Read all precautions and instruc- tions in this manual before using this equipment.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. Neither ICON nor Polishop assumes any responsibility for personal injury or property damage sustained by or through the use of this product.
Page 4
22. Never leave the treadmill unattended while 26. Never insert any object into any opening on it is running. Always remove the key, press the treadmill. the power switch into the off position (see the drawing on page 6 for the location of the 27.
BEFORE YOU BEGIN Thank you for selecting the new IMAGE VITALITY number and serial number before contacting us. The treadmill. The VITALITY treadmill provides an impres- model number and the location of the serial number sive selection of features designed to make your decal are shown on the front cover of this manual.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 7. • Place all parts in a cleared area and remove the • Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex key materials until you finish all assembly steps.
Page 9
3. Identify the Right Upright (76). Have a second person hold the Right Upright near the Base (74). Wire See the inset drawing. Tie the wire tie in the Right Upright (76) securely around the end of the Upright Wire (63). Then, insert the Upright Wire into the lower end of the Right Upright as you pull the other end of the wire tie out of the top of the Right Upright.
Page 10
5. Hold the Right Upright (76) against the Base (74). Be careful not to pinch the Upright Wire (63). Insert a 3/8" x 3 1/4" Screw (2) with a 3/8" Star Washer (3) into the top hole in the Right Upright (76).
Page 11
7. Set the console assembly face down on a soft surface to avoid scratching the console Console assembly. Assembly Remove and discard the two indicated screws (B). Then, remove the Console Crossbar (61). 8. Remove and discard the four indicated screws (C).
Page 12
9. Attach the Console Crossbar (61) to the Left and Right Uprights (66, 76) with four #10 x 3/4" Screws (8) and four #10 Star Washers (23); start all four Screws, and then tighten them. Then, firmly tighten the two 5/16" x 3/4" Screws (5) and the two 5/16"...
Page 13
11. Insert the wires into the Right Handrail (64) through the indicated hole as you set the con- Console Assembly sole assembly on the Left and Right Uprights (66, 76). Make sure that no wires are pinched. Attach the console assembly with ten #8 x 3/4" Screws (4);...
HOW TO USE THE TREADMILL HOW TO PLUG IN THE POWER CORD Follow the steps below to plug in the power cord. This product must be earthed. If it should malfunc- 1. Plug the indicated end of the power cord into the tion or break down, earthing provides a path of least socket on the treadmill.
Page 15
CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 16. To use the man- ual mode, see page 16. To use a preset workout, see page 18. To use the information mode, see page 19. The treadmill console offers a selection of features designed to make your workouts more effective and To use the sound system, see page 19.
Page 16
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
Page 17
4. Change the incline of the treadmill as desired. display shows the information that you are most interested in viewing. Note: While information is To change the incline of the treadmill, press the shown in the upper display, the same information Incline increase and decrease buttons or one of will not be shown in the lower left or lower right the numbered Quick Incline buttons.
Page 18
HOW TO USE A PRESET WORKOUT flash. If a different speed and/or incline setting is programmed for the next segment, the speed and/ 1. Insert the key into the console. or incline setting will flash in the display to alert you. The treadmill will then automatically adjust to the See HOW TO TURN ON THE POWER on page 16.
Page 19
THE INFORMATION MODE HOW TO USE THE SOUND SYSTEM The console features an information mode that keeps To play music or audio books through the console track of treadmill usage information and allows you to sound system while you exercise, plug a 3.5 mm male select a unit of measurement for the console.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before folding the treadmill, adjust the incline to Before moving the treadmill, fold it as described at the zero. If you do not do this, you may damage the left.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE SYMPTOM: The power turns off during use Regularly clean the treadmill and keep the walking a. Check the power switch (see drawing c at the left). belt clean and dry. First, press the power switch into If the switch has tripped, wait for five minutes and the off position and unplug the power cord.
Page 22
SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. If an extension cord is needed, use only a 3-con- a. If the walking belt is off-center, first remove the ductor, 14-gauge (1 mm ) cord that is no longer key and UNPLUG THE POWER CORD.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
PART LIST Model No. EBRTL39515.0 R0914A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Ground Screw Idler Roller 3/8" x 3 1/4" Screw Left Rear Foot 3/8" Star Washer Wire Tie #8 x 3/4" Screw Drive Motor Belt 5/16"...
LIMITED WARRANTY ICON Health & Fitness, Inc. warrants this product to be free from defects in workmanship and material, under normal use and service conditions. Parts and labor are warranted for ninety (90) days from the date of purchase. This warranty extends only to the original purchaser (customer). Polishop’s obligation under this warranty is limited to repairing or replacing the product, at Polishop’s option.