Table of Contents
Advertisement
Expand the open seams on the
3
rear of the seat bottom slightly
to verify the locations of the
LATCH lower anchors.
The markings above the LATCH
lower anchors indicate the loca-
tions of the LATCH lower anchors
for the attachment of a child-
restraint system.
Remove the head restraint.
4
Refer to Head Restraints on P. 27.
Secure the child-restraint system using BOTH LATCH lower
5
anchors, following the child-restraint system manufacturer's instruc-
tion. Pull on the child-restraint to be sure both anchors are
engaged.
If your child-restraint system came equipped with a tether, that
6
means it is very important to properly secure the tether for child
safety. Please carefully follow the child-restraint system manufac-
turer's instructions when installing tethers.
WARNING
Use the tether and tether anchor only for a child-restraint system
■
Using the tether or tether anchor to secure anything but a child-restraint
system is dangerous. This could weaken or damage the tether or tether
anchor and result in injury.
Always remove the head restraint and install child-restraint system
■
Installing a child-restraint system without
removing the head restraint is danger-
ous. The child-restraint system cannot be
installed correctly which may result in
death or injury to the child in a collision.
YARIS iA_OM_OM99N89z_(U)
1-3. Child Restraint
Tether strap
Anchor bracket
59
1
Advertisement
Table of Contents
