Table of Contents
Advertisement
100
2-2. Door and Locks
Automatic transaxle vehicles
Current Function Number
Function Number 1
Function Number 2
Function Number 3
Function Number 4
Function Number 5
Function Number 6
Cancel setting
Function number 3 is the factory setting for your vehicle.
●
●
There are only a total of three auto lock/unlock settings available for manual
transaxle vehicles, and six for automatic transaxle vehicles. Be sure to
press the unlock side of the driver's door-lock switch the correct number of
times according to the selected function number. If the switch is mistakenly
pressed four times on a manual transaxle vehicle or seven times on an
automatic transaxle, the procedure will be cancelled. If this occurs, start the
procedure from the beginning.
The doors cannot be locked or unlocked while the setting function is being
●
performed.
The procedure can be cancelled by pressing the lock side of the driver's
●
door-lock switch.
WARNING
Do not pull the inner handle on a front door
■
Pulling the inner handle on a front door while the vehicle is moving is dan-
gerous. Passengers can fall out of the vehicle if the door opens accidentally,
which could result in death or serious injury.
YARIS iA_OM_OM99N89z_(U)
Press unlock side of lock switch once
Press 2 times
Press lock side of lock switch
Press 3 times
Press 4 times
Wait for 3 second
Press 5 times
Press 6 times
Function set (The number of
beeps heard is the same as the
Press 7 times
selected function number)
Cancel setting
Advertisement
Table of Contents
