Table of Contents
Advertisement
492
6-3. Battery Runs Out
4
Connect the jumper cables in the exact sequence as in the illustra-
tion.
1
Connect one end of a cable to the positive terminal on the dis-
charged battery.
2
Attach the other end to the positive terminal on the booster bat-
tery.
3
Connect one end of the other cable to the negative terminal of
the booster battery.
4
Connect the other end to the ground point indicated in the illus-
tration away from the discharged battery.
5
Start the engine of the booster vehicle and run it a few minutes.
Then start the engine of the other vehicle.
6
When finished, carefully disconnect the cables in the reverse order
described in the illustration.
7
If the battery cover has been removed, install it in the reverse order
of removal.
Verify that the covers are securely installed.
YARIS iA_OM_OM99N89z_(U)
Jumper cables
Booster battery
Discharged battery
Advertisement
Table of Contents
