How To Install The Pr-240 Power Supply (Option) - Furuno FA-170 Installation Manual

1. MOUNTING
1.5

How to Install the PR-240 Power Supply (option)

When selecting a mounting location for the unit, keep the following in mind:
• Keep the unit away from areas subject to water splash.
• Locate the unit away from exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• A magnetic compass will be affected if the unit is placed too close to it. Observe the
following compass safe distances to prevent disturbance to the magnetic compass:
Standard compass: 0.90 meters
Steering compass: 0.60 meters
Fix the unit with four self-tapping screws (416) to a desktop or the deck as shown in
the figure below. It is not necessary to open the cover.
1-14