http://tsn.pstc.panasonic.com/viewing/NA/PT-53X54J/SVC/s1302000000.html
13.2 Disassembly for CRT replacement
TOP PREVIOUS NEXT
To facilitate CRT replacement, the complete CRT mounting chassis does not need to be removed.
1. Remove the main chassis block from the cabinet.
2. Remove the optical bracket metal cover (front side x-ray shield) by removing 3 screws on top.
3. Remove the defective CRT anode lead from the high voltage distributor block that is mounted on the flyback
transformer. Discharge to CRT chassis.
4. Unplug connectors from D-Board. See board layout. D14 for red, D15 for green and D16 for blue.
5. Unplug the defective CRT black DAG ground connector from the CRT Board.
6. Remove the CRT Board from the defective CRT neck.
7. Remove (4) screws from the defective CRT housing.
Caution:
Do not remove the (4) CRT lens screws. Support the CRT assembly when loosening screws.
http://tsn.pstc.panasonic.com/viewing/NA/PT-53X54J/SVC/s1302000000.html (1 of 3) [23/04/2012 12:16:16 p.m.]
CRT replacement
CRT replacement
Focus pack location