Oki C823n User Manual page 27

Installing the 16-GB SD Memory
Card Kit
For storing print data or a secure printing, install
the SD memory card kit.
SD memory socket
Memo
● The SD memory socket is attached to the SD memory
card.
Note
● Use only genuine Oki Data products. The performance
cannot be guaranteed when using other products.
● The static electricity may cause damage to the parts.
Discharge the static electricity in your body by touching
grounded metallic parts, etc. before work.
● You can not use the SD memory card with the protection
switch for accidental overwriting locked. Make sure to
release the lock.
1
Turn off your printer, and then unplug
the AC cord and Ethernet or USB cable.
Reference
● "Turning Off the Power" P.21
2
Open the access cover (1).
SD memory card
1
- 27 -
3
Remove the metal plate (2) by sliding it
upward.
(1)
Put your finger in the recess of the
metal plate (2), and slide it upward.
(2)
Pinch the lower part of the metal
plate (2), and pull it forward.
4
Make sure the LED (3) indicated by the
arrow turns off. If it is lit, wait until it
turns off.
Preparing Your Printer
1
2
2
3