Oki C823n User Manual page 25

3
Slide the metal plate (2) upward to
remove.
Note
● If the SD memory card socket is attached, remove
the SD memory card.
(1)
Put your finger in the recess of the
metal plate (2), and slide it upward.
(2)
Pinch the lower part of the metal
plate (2), and pull it forward.
4
Make sure the LED (3) indicated by the
arrow turns off. If it is lit, wait until it
turns off.
5
2
6
2
3
- 25 -
Insert the additional RAM (4) into the
slot and fix it by pushing it toward the
printer.
Note
● Be sure to check a direction of an additional RAM.
The additional RAM has small dents on its connector,
which are fitted with a connector of a slot.
4
Install the metal plate (2).
(1)
First, insert the upper part of the
metal plate (2) in the printer, then
install the metal plate.
(2)
While holding the lower part of the
metal plate (2), slide the metal plate
downward and secure it.
Note
● Attach the SD memory card socket before installing
the metal plate if the SD memory card socket was
attached to the printer.
Preparing Your Printer
1
2
2