Preparing Your Printer
7
Close the access cover (1).
1
8
Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
9
Press the scroll button
operator panel.
10
Press the scroll button
[Configuration] and press the
<ENTER> button.
11
Press the scroll button
to select [System] and press the
<ENTER> button.
1
or
on the
to select
several times
- 26 -
12
Press the scroll button
select [RAM] and press the <ENTER>
button.
13
Check that the value of [RAM] has
increased.
- For memory expanded to 256 MB, it is
[512 MB]; for memory expanded to 512
MB, it is [768 MB].
Note
● If the value of [RAM] has not increased, turn off
your printer and unplug the AC cord and Ethernet or
USB cable, and then reinstall the additional RAM.
14
Press the <ON LINE> button.
several times to