INTAKE MANIFOLD
FUEL INJECTION (FUEL SYSTEMS)
16) Disconnect the connector from the oil pressure
switch.
19) Remove the bolts which hold intake manifold
onto the cylinder heads.
17) Disconnect the connector from the camshaft
position sensor.
~
18) Disconnect the fuel hoses from the fuel pipes.
WARNING:
Do not spill fuel.
Catch fuel from hoses in a container or cloth.
(A) Fuel delivery hose
(B) Return
hose
(C) Evaporation hose
20) Remove the intake manifold.
B: INSTALLATION
1) Install the intake manifold onto the cylinder
heads.
NOTE:
Always use new gaskets.
Tightening torque:
25 N-m (2.5 kgf-m, 18.1 fi-lb)
FU(S0HC)-17