Setting Up The Netware Print Server In Ndps Mode - Toshiba e-STUDIO5540C Software Installation Manual

1 OVERVIEW
18
Click [OK] to close Assignments window for the print server.
The print server is created.
 Setting up the NetWare print server in NDPS mode
This equipment supports printing over NetWare 6.5 networks running either the TCP/IP protocols or the IPX
protocol. For pure IP printing, this equipment takes advantage of features in NDPS (Novell Distributed Print
Services).
You must have administrator privileges on the network to create new NDPS objects.
NDPS is not like the earlier queue-based versions of NetWare printing. Instead, you use an NDPS Manager
and a Printer Agent, which control the tasks previously handled by a print queue, print server, and spooler.
Before configuring the NetWare print server in NDPS mode, confirm the following:
 For using Windows Vista as the client computers, NetWare 6.5 Support Pack 8 must be installed.
 Make sure you have a valid IP address for this equipment and for any computers that will print to it (when
used in the TCP/IP network).
 In the equipment setup, enter the IP address, Subnet mask, and Gateway address for this equipment
(when used in the TCP/IP network).
 To enable Novell iPrint, Novell iManager must be installed beforehand. For instructions on how to install
the Novell iManager, see the documentation for the Novell iManager that is provided by Novell, Inc.
 Novell iPrint Client must be installed.
 P.25 "Setting up the Novell iPrint"
 Setting up NDPS
1
Enter the URL "https://<IP address>/nps/iManager.html" into the address bar of your
browser to launch iManager.
2
Enter the user name, password, and Tree to log in to Novell iManager.
3
Click [iPrint] in Roles and Tasks, and select [Create Broker].
The dialog box for creating the broker appears.
If the NetWare print server has been installed as supporting the NDPS service, the NDPS Broker is
created as default. In this case, you can use the default NDPS Broker.
4
Specify the [Broker name] and [RMS Volume] options, and click [OK].
The NDPS Broker is created.
5
Click [iPrint] in Roles and Tasks, select [Create Print Manager].
The dialog box for creating the Print Manager appears.
6
Specify the [Print Manager name] and [Database volume] option, and click [OK].
The NDPS Manager is created.
7
Select [Manage Broker].
The dialog box for selecting the NDPS Broker appears.
8
Specify the preferred broker that has been created in [NDPS Broker name], and click
[OK].
Click [Startup] to load the broker if it is not active.
22 Setting Up NetWare Print Server