Table of Contents
Advertisement
This screen contains the following fields:
Table 35 DDNS
LABEL
Enable Dynamic
DNS
Service
Provider
Service Type
Domain Name
Login Name
Password
IP Update Policy Select the policy used by the WiMAX Device. Options are:
User Defined IP
Wildcards
MX
Backup MX
MX Host
7.16 Content Filter
Use these settings to allow ("whitelist") or block ("blacklist") connections to and
from specific web sites through the WiMAX Device.
Click Network Setting > Content Filter to open this screen as shown next.
Figure 44 Content Filter Screen
MAX208M User's Guide
DESCRIPTION
Select this to enable dynamic DNS on the WiMAX Device.
Select the dynamice DNS service provider for the WiMAX Device.
Select the dynamic DNS service type.
Enter the domain name.
Enter the user name.
Enter the password.
•
Auto Detect
•
WAN
•
User Defined
If you chose "User Defined" for the IP Update Policy, enter the user
defined IP address.
Select this to allow a hostname to use wildcards such as "*".
Select this to enable mail routing, if supported by the specified DYNDNS
service provider.
Select this to enable a secondary mail routing, if supported by the
specified DYNDNS service provider.
Enter the host to which mail is routed when the MX option is selected.
Chapter 7 Network Settings
105
Advertisement
Table of Contents
