Chapter 10 Troubleshooting
Make sure the Power LED is on and not blinking.
1
Press and hold the Reset button for five to ten seconds. Release the Reset button
2
when the Power LED begins to blink. The default settings have been restored.
If the WiMAX Device restarts automatically, wait for the WiMAX Device to finish
restarting, and log in to the Web Configurator.
If the WiMAX Device does not restart automatically, disconnect and reconnect the
WiMAX Device's power. Then, follow the directions above again.
10.5 Pop-up Windows, JavaScript and Java
Permissions
Please see
144
Appendix C on page
183.
MAX208M User's Guide