Table of Contents
Advertisement
IBM Telephony Installations
installation CD contents have been copied to an accessible directory (you may
not use long directory names or spaces in the directory name).
3.6 IBM Call Manager Setup
The first time you run IBM Call Manager you will need to enter login
information and setup directories.
1. From the Start menu, navigate to Programs/IBM Computer Telephony/IBM
Call Manager.
2. When the login window displays, enter your user name, password and
extension number. You can check the box to save this information, and you
will not need to enter it the next time you log in. Click OK when done.
3. The Voice Mail Path window will display. If you are using IBM VoiceMaster
voice mail, make sure the path information is correct. If you are not using
IBM VoiceMaster, check "Do not use NetPhone voice mail". Click OK when
done.
4. Refer to the IBM Call Manager on-line help and/or the IBM Call Manager
User's Guide for more information.
If you have more than one IBM Computer Telephony server:
To allow a IBM Call Manager client to access multiple servers, the client's
TSLIB.INI file must be edited to add the additional server names, as in the
example below:
[Telephony Servers]
; This is a list of the servers offering Telephony
Services via TCP/IP.
; Either domain name or IP address may be used;
default port number is 450
; The form is: host_name=port_number
;
; tserver.mydomain.com=450
; 127.0.0.1=450
;
16
For example:
IBM CTS Installation Guide
Advertisement
Table of Contents
