Table of Contents
Advertisement
3. IBM Telephony
Installations
These installation instructions are intended for a typical new IBM Telephony
installation. If you are upgrading a IBM Telephony system, refer to the Upgrade
Installations section on page 19.
3.1 Prerequisite Hardware and Software
Server:
•
586/133mhz (Pentium) or higher with at least 64MB RAM, running
Windows NT Server Software V4.0 (including service pack 3 or above).
•
A CD-ROM and diskette drive are required for installation.
•
A typical IBM Telephony installation will require at least 16MB disk space on
the server. Additional disk space requirements are dependent on number of
voice mail users and number and size of stored messages.
Clients:
•
486 (or higher) or Pentium with at least 16MB RAM, running Windows 95
or Windows NT.
•
IBM Call Manager clients must have a server user account.
•
Sound capability is required to play voice mail messages delivered by e-mail.
The IBM Telephony installation process should take approximately 45 minutes.
Telephones will not be operational during parts of the installation process. You
should schedule installation for a time when this will not affect phone users.
IBM CTS Installation Guide
IBM Telephony Installations
7
Advertisement
Table of Contents
