Panasonic KX-TDA100D Features Manual page 30

1.1.1 Incoming Trunk Call Features
Programming Example
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS
<Intercept Destination of Virtual PS>
Ext. No. of the Virtual PS
When extension 2001 is called from another extension or is the first destination
of an incoming trunk call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
Different intercept destinations can be programmed for each time mode (day/lunch/break/night).
[Available Intercept Destinations]
Wired Extension (PT/SLT/ISDN Extension/T1-OPX)
PS
Incoming Call Distribution Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
Conditions
•
Intercept Routing—DND on/off
Intercept Routing—DND can be enabled or disabled system programming.
If disabled, one of the following is activated depending on the type of line that a call arrives through:
30 Feature Guide
FWD Destination
2001
600
... ...
Intercept Destination
Day Lunch Break
2001 1001
... ...
Intercept Destination
"600" is an example of a
Floating Extension No.
for the External Pager
Night
1001 1001 1001
... ... ...
...
...
...
Availability
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü