Dodge 2001 Ram 1500 Owner's Manual page 1501

14 - 14 FUEL DELIVERY - GASOLINE
FUEL PUMP MODULE (Continued)
Fig. 20 Fuel Pump Module—35 Gallon Fuel Tank
1 - FUEL FILTER/PRESSURE REGULATOR
2 - FUEL SUPPLY FITTING
3 - ELECTRICAL CONNECTOR
4 - LOCKNUT
5 - FUEL PUMP MODULE
6 - AUXILIARY CAPPED FITTING
Fig. 21 Locknut Removal/Installation—TYPICAL
1 - SPECIAL TOOL 6856
2 - LOCKNUT
(2) Position locknut over top of fuel pump module.
Install locknut finger tight.
(3) Rotate module until positioned as shown in
(Fig. 22) or (Fig. 23). This step must be performed to
prevent float from contacting side of fuel tank. Be
sure fuel filter/fuel pressure regulator is pointed to
drivers side of vehicle.
(4) Install Special Tool 6856 (Fig. 24) to locknut.
(5) Tighten locknut to 24– 44 N·m (18–32 ft. lbs.)
torque.
(6) Install fuel tank. Refer to Fuel Tank - All
Engines in the Removal/Installation section.
Fig. 22 Fuel Pump Module—26 or 34 Gallon Fuel
1 - FUEL FILTER/PRESSURE REGULATOR
2 - FUEL SUPPLY FITTING
3 - REAR ROLLOVER VALVE
4 - ELECTRICAL CONNECTOR
5 - FUEL PUMP MODULE
6 - FRONT ROLLOVER VALVE
7 - LOCKNUT
Fig. 23 Fuel Pump Module—35 Gallon Fuel Tank
1 - FUEL FILTER/PRESSURE REGULATOR
2 - FUEL SUPPLY FITTING
3 - ELECTRICAL CONNECTOR
4 - LOCKNUT
5 - FUEL PUMP MODULE
6 - AUXILIARY CAPPED FITTING
BR/BE
Tank